D’Agostino Momentum M400 MxV Mono and S250 MvX Amplifiers: Upgraded Power and Ultrafast Transistors

D’Agostino has updated its Momentum amplifiers. Two new additions are the Momentum M400 MxV Mono and the Momentum S250 MvX stereo amplifiers. They are issued in the same cases as before – only the design of massive arrow indicators has been updated. Not only that, existing models can be upgraded to the M400 MxV Mono and S250 MvX versions.

The Momentum models became the foundations for D’Agostino – the Momentum all-in-one was the first product designed and manufactured by the company. Now the new items are equipped with transformers, the winding scheme of which has saved half of the occupied area. The transformer power of the Momentum M400 MxV has reached 1,800 VA – compared to its predecessor, its output current has increased by almost half.

D'Agostino Momentum M400 MxV Mono
D’Agostino Momentum M400 MxV Mono

This transformer is complemented by a capacitor bank with a capacity of almost 100,000μF. As a result, the power adapter will deliver an output power of 400/800/1 600W when working with 8/4/2ohm speakers. For the S250 MvX, this is 250W into 8 ohms, 500W into 4 ohms, and 1,000W into 2 ohms. True, the signal-to-noise ratio of the M400 MxV Mono was 115dB, while that of the Momentum S250 was 105dB.

According to the manufacturer, the bipolar transistors powering the input stage provided Momentum amplifiers with ten times more current and power than previous models. At the same time, additional power transistors in the output stage reduced the load. The damping coefficient of new products is indicated by the value of the output resistance – 1 mOhm. The input signal is received on balanced XLR connectors.

D'Agostino Momentum S250 MvX stereo amplifiers
D’Agostino Momentum S250 MvX stereo amplifiers

The high-current transistors used in the updated Momentum are considered by D’Agostino to be one of the fastest currently available. They are rigorously selected before installation. The Momentum M400 MxV uses 26 such transistors that operate at frequencies up to 69 MHz. Each transistor is attached to copper venturi heatsinks with two stainless steel pieces. According to D’Agostino, “Thermal issues in the Momentum M400 MxV amplifiers are of little concern”. Both Momentum amplifiers are available in a silver/gold finish, while a silver/black version is available upon request.

The cost of D’Agostino Momentum M400 MxV Mono and Momentum S250 MvX amplifiers has yet to be announced.

Leave a Reply

Your email address will not be published. Required fields are marked *