Orchard Audio PecanPi Rev 3.0 will get auto-switchable S/PDIF input
The American company Orchard Audio announced the updated PecanPi Streamer Ultra DAC, Streamer and Streamer Ultra in version 3.0. These network audio players with DAC and headphone amplifier are still based on the PecanPi DAC board, which Orchard Audio also sells separately. As before, in the new products it is supplemented by Raspberry Pi and Asus Tinker Board single-board computers.
The Streamer model works with software platforms such as Volumio, Roon, PiCorePlayer (Squeeze Audio Device) or moOde Audio. A future user will be able to install any of them to choose from. At the same time, the addition of a 5-inch touch screen on the front panel (Streamer Ultra) and an S/PDIF input turns the Streamer into a completely independent and self-sufficient device.
Its rear panel features Ethernet, USB, XLR, RCA ports and a power jack. S/PDIF input (coaxial) just allows you to use the Orchard Audio PecanPi Rev 3.0 standalone. The auto-switch feature returns the device to streaming if there is no signal on the S/PDIF – and vice versa.
So the input selector is essentially not needed. In addition, the Orchard Audio PecanPi Rev 3.0 has linear low-noise signal regulators that provide the functionality of a preamplifier.
Sales of new products from the updated Orchard Audio website are scheduled for March 2022. In the US, Orchard Audio PecanPi DAC Rev 3.0 will cost $350, Streamer Rev 3.0 will cost $650, and Streamer Ultra Rev 3.0 will cost $950.
Orchard Audio PecanPi Specifications
XLR Output (including headphone driver):
- Signal-to-Noise Ratio (SNR): 130dB (A-weighted)
- Residual Noise: 1.6uV (A-weighted)
- Dynamic Range (DNR): 125dB
- Total Harmonic Distortion + Noise (THD+N): -110dB or 0.0003%
- Frequency Response: DC (0Hz) to 22kHz @ 48kHz sample rate
- Frequency Response: DC (0Hz) to 44kHz @ 96kHz sample rate
- Frequency Response: DC (0Hz) to 88kHz @ 192kHz sample rate
- Output Voltage: 5Vrms (+16.2dBu)
RCA Output (including headphone driver):
- Signal-to-Noise Ratio (SNR): 124dB (A-weighted)
- Residual Noise: 1.6uV (A-weighted)
- Dynamic Range (DNR): 122dB
- Total Harmonic Distortion + Noise (THD+N): -110dB or 0.0003%
- Frequency Response: DC (0Hz) to 22kHz @ 48kHz sample rate
- Frequency Response: DC (0Hz) to 44kHz @ 96kHz sample rate
- Frequency Response: DC (0Hz) to 88kHz @ 192kHz sample rate
- Output Voltage: 2.5Vrms (+10.2dBu)
Balanced Headphone Output:
- Power into 32Ω: 1.56W peak
- Power into 150Ω: 333mW peak
- Power into 300Ω: 167mW peak
- Power into 600Ω: 83.5mW peak
- Damping Factor: >210
Regular Headphone Output:
- Power into 16Ω: 781mW peak
- Power into 32Ω: 390mW peak
- Power into 150Ω: 83.5mW peak
- Power into 300Ω: 41.6mW peak
- Damping Factor: >230
Input Power:
- Input Connector: Barrel Plug, 2.1mm I.D. x 5.5mm O.D. x 9.5mm
- Input Voltage: 9VDC
- Input Power: 20W Max (w/ Raspberry Pi)
General:
- Sampling Rates: PCM up to 192kHz
- Bit Rates: Up to 24-bit
- Formats: Supports all formats.
- DSD is converted to PCM before playback.
- DAC Compatible Rpi Models: 1B+, 1A+, 2B, 3B, 3B+, 4B, Zero, & ZeroW
- DAC Compatible Asus Models: Tinker Board & Tinker Board S
Size:
- Streamer / Ultra: 195 x 120 x 100mm (7.7 x 4.75 x 4.25in)
- Streamer / Ultra: 195 x 120 x 100mm (7.7 x 4.75 x 4.25in)