PMC Launches A New Studio Loudspeaker Range
The updated line of studio monitoring acoustics, created by the British company PMC, will replace the TwoTwo series models in its portfolio. PMC assured that the new products – PMC6, PMC6-2 and PMC8-2 mid and near field monitors, complemented by PMC8 SUB and PMC8-2 SUB subwoofers – have the same sound character.
The similarity in sound, according to the PMC, has become even more “neutral and fast” – a sign of a good level of development used in the new products. PMC talked about brand new speakers, current DSPs and digital amplifiers combined with ATL’s proprietary technology enhancements and Laminair’s airflow optimization.
PMC has proposed scalable systems that are easy to scale up as user demands increase. Monitors can be supplemented with active subwoofers to create PMC XBD dual cabinet systems. This does not prevent the use of subwoofers as monitor acoustics of bass subchannels. There are also expansion slots for alternative connection options.
The acoustics can be controlled from panels on the rear walls or using the SoundAlign network interface in a browser window on a PC, Mac or tablet.
PMC is already accepting pre-orders for all new speaker. Prices range from €6,115 for the PMC6 to €15,370 for the PMC8-2. The PMC8 SUB will cost €3,075 and the PMC8-2 SUB €5,420.
PMC6 Specification
- TypeActive 2-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement
LF PMC 150mm (6”) studio 6 driver
HF PMC 27mm (1”) soft dome tweeter - Effective ATL™ Length 1.8m (5.9ft)
- Frequency Response 39Hz – 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL 106dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL 118dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity
H +/-60 degrees
V +50/-40 degrees (-6dB off axis @10kHz) - Input XLR switchable between analogue & digital AES3
Analogue input– +20/+24dBu max. input level (selectable)- 22K ohm input impedance
Digital input– 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz sample rate- 110 ohm input impedance
Expansion card slot– For future connectivity upgrades - Output XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network RJ45 for use with PMC SoundAlign web interface
- Features Level Trim (+/-10dB)Orientation (portrait, landscape, auto)High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
- Latency 2.4mS
- Amplifier power per channel
LF 1 x 200Wrms
HF1 x 200Wrms - Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle) 35W
- Power consumption (max) 400W
- Cabinet dimensions Portrait
H400mm (15.7”)
W 215mm (8.5”)
D 372mm (14.6”) - Cabinet dimensions Landscape
H 215mm (8.5”)
W 400mm (15.7”)
D 372mm (14.6”) - Weight 11.1kg (24.4lbs) each
PMC8-2 Specification
- Type Active 3-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement
LF 2 x PMC 200mm (8”) studio 8 drivers
MF PMC 55mm (2”) soft dome mid-range
HF PMC 27mm (1”) soft dome tweeter - Effective ATL™ Length 3m (9.8ft)
- Frequency Response 25Hz – 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL 113dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL 125dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity
H+/-45 degrees
V+/-50 degrees (-6dB off axis @10kHz) - Input XLR switchable between analogue & digital AES3
Analogue input– +20/+24dBu max. input level (selectable)- 22K ohm input impedance
Digital input– 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz Sample Rate- 110 ohm input impedance
Expansion card slot– For future connectivity upgrades - Output XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network RJ45 for use with PMC SoundAlign web interface
- Features Level Trim (+/-10dB) High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB) User presets (3 + factory defaults)
- Latency 2.4mS
- Amplifier power per channel
LF 2 x 400Wrms
MF 1 x 400Wrms
HF 1 x 400Wrms - Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle) 50W
- Power consumption (max) 1500W
- Cabinet dimensions
H 534mm (21”)
W 551mm (21.7”)
D 440mm (17.3”) - Weight 39kg (86lbs) each
- Available Finishes: Studio black
PMC8 SUB Specification
- Type Active subwoofer with an 8-inch bass driver and ATL™ bass loading
- Drive Unit Complement
LF PMC 200mm (8”) studio 8 driver - Effective ATL™ Length 3m (9.8ft)
- Frequency Response 25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
- Sensitivity +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL 109dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL 121dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Input XLR switchable between analogue & digital AES3
Analogue input– +20/+24dBu max. input level (selectable)- 22K ohm input impedance
Digital input– 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz Sample Rate- 110 ohm input impedance
Expansion card slotFor future connectivity upgrades - Output XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network RJ45 for use with PMC SoundAlign web interface
- Features Level Trim (+/-10dB) High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
- Latency 2.4mS
- Amplifier power 300Wrms
- Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle) 25W
- Power consumption (max) 300W
- Cabinet dimensions
H 266mm (10.5”)
W 551mm (21.7”)
D 440mm (17.3”) - Weight 18.5kg (40.8lbs) each
- Available Finishes: Studio black
PMC8-2 SUB Specification
- Type Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
- Drive Unit Complement
LF PMC 200mm (8”) studio 8 driver - Effective ATL™ Length 3m (9.8ft)
- Frequency Response 25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
- Sensitivity +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL 115dB @1m (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL 121dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Input XLR switchable between analogue & digital AES3
Analogue input– +20/+24dBu max. input level (selectable)- 22K ohm input impedance
Digital input– 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz Sample Rate- 110 ohm input impedance
Expansion card slot– For future connectivity upgrades - Output XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network RJ45 for use with PMC SoundAlign web interface
- Features Level Trim (+/-10dB) High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS) Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB) User presets (3 + factory defaults)
- Latency 2.4mS
- Amplifier power per channel 300Wrms
- Mains 100 – 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle) 25W
- Power consumption (max) 300W
- Cabinet dimensions
H 534mm (21”)
W 551mm (21.7”)
D 440mm (17.3”) - Weight 37.5kg (82.7lbs) each
- Available Finishes: Studio black